SRT-8 Daytona Clone

Using the plastic stud as a guide I made a new steel tab for the attachment point which was welded to the seat base . I then removed the plastic stud.

A bit of plastic had to be trimmed from the top side of the plastic cover in order to allow the side of the seat back to rotate forward without pinching the upholstery.

The seat belt catch is attached to the other side of the seat and so that the wires for that would not catch in the pivot I had to create more slack by moving the plug for those wires closer to the back of the seat.

I then put the painted seat catch assembly back on the seat back.