SRT-8 Daytona Clone

To start with on the HVAC ducts I installed the dash wiring harness and the dash face to see what I had in the way of room to work with. With that done I cut the parts of the stock duct work off that interface with the dash outlets. I capped them off and made some brackets to hold them in place on the dash sub frame. There are a total of 4 heat outlets. Two in the middle of the dash and two on either end of the dash. There are also two outlets that connect with the defroster that mount to the dash top left and right. I decided to start with the four forward facing outlets as they require the most room.