SRT-8 Daytona Clone

Well . We have a saying at the shop I work in. "Our stuff is nice because we do it twice". Looks like I brought that mentality home. I had tried to use the 06 package tray cover and just extend the upper cover and it just didn't look right. Number one I picked the wrong covering which was a mottled gray. Number 2 because of all of the baby harness pick up points the cover sat way too high in the window. I cut all of those out so that I could lay a new panel made out of masonite a little flatter. I used a bit of sheet metal to transition the top panel to the vertical and drilled some sound holes in the top. I also put some 10/24 threaded studs in the sub structure so that I could mount the speakers from the bottom. They were top mount speakers but if they ever went bad the new rear glass would prevent removal.

On the same note of redoing stuff I realized after I made my "A" post covers that they were crowding the attachment points for the sun visors. No problem. I just moved the attachment points inboard a little.  I should have started with the driver side as that worked fine on the passenger side. On the driver side with the rear view mirror angled towards you the visor would not come down. So I move the attachment points back out. Now I had to make new "A" post covers that laid flatter against the "A"post. After a lot of head scratching I looked at the "B" post covers from the 06 and cut out some new ones. After a bit of carving and some reshaping with a heat gun I got lucky and they fit pretty good. The added feature is I was able to eliminate the small transition piece from the "A" to the door seal trim.

Here is a picture of the old left side cover and the new replacement cover.